Student Accommodation Development – NSW

Student Accommodation Development

Dewatering was required to allow for the construction of student accommodation with a 2-level basement car park. Bulk excavation level approx. 5m BEGL with localised pits going further 1.5m deep to 6.5m BEGL.

Installation of 240m perimeter dewatering system along with localised pit dewatering. Treatment to ANZEC 95% Freshwater guidelines.

The Chemical Dosing System installation was recommended for efficient water clarification and pH correction. The system is designed to effectively remove silt, sand, and other solids from water at flow rates of up to 5L/s. This makes it an excellent choice for sites with limited space. The system incorporates the addition of flocculants, coagulants, and pH adjustments throughout the treatment process. It also includes monitoring features such as pH, turbidity, and flow meter measurements. The final step of the treatment process at Richards Crookes involves the use of a metals removal module (MRM) for oxidation and filtration, specifically targeting elevated metal concentrations in the water.

Richard Crookes site encounters the presence of heavy metals in its groundwater, including Aluminium, Arsenic, Zinc, Manganese, and Iron. These heavy metals pose a challenge for the project and NPE is committed to meeting the ANZECC & ARMCANZ (2000) freshwater quality guidelines.

NPE chooses the most suitable chemical compositions to treat the water and activates and cleans MRM media to ensure maximum media efficiency.

Wellpoint Dewatering Solution Delivered for Modcon Civil- SA

Our South Australian team was recently engaged by Modcon Civil to design and deliver a tailored dewatering solution in Robe,…

Eastern Treatment Plant Bypass – Melbourne, VIC

National Pump & Energy deliver bypass works for the incoming side of one of Melbourne’s busiest treatment plants. Eastern Treatment…

Bore Pump Installations & Commissioning – Kalgoorlie WA

The Kalgoorlie branch has recently completed a large run of bore pump installations and commissioning works across several sites. Over…

DN630 Pipeline Welding & Installation Project – Queensland

National Pump & Energy (NPE) was engaged to deliver specialised support for a DN630 HDPE pipeline installation as part of…

Poly Butt Welding for Resource Recovery Park

National Pump & Energy (NPE) was engaged to supply experienced poly welders and specialist poly welding equipment to support onsite…

NSW Central Coast Sewer Bypass Upgrade

National Pump & Energy was engaged to design, supply, install, and maintain a temporary sewer bypass pumping system to support…

Jovan Qualifies as Mechanical Fitter in Newcastle NSW | Apprenticeship Success

We are proud to announce that Jovan has officially qualified as a Mechanical Fitter after successfully completing his apprenticeship at…