MTP090KW HH 50HZ Submersible Pump Minetuff
| Pump Specification Data | |
|---|---|
| Motor Type | Submersible Squirrel-Cage Induction |
| Pump Type | Submersible Centrifugal |
| Ingress Protection Rating | IP68 |
| Insulation Class | Class H (IEC 85) |
| Motor Protection | Stator Thermistors in Series |
| Earth Protection | Earth Diode in Series |
| Max Allowable Consecutive Restarts Per Hour | 100mm EN1092-2-T11 |
| Cable Type | Type 241.1 Screened Mining 3G50+3XE+P |
| Cable Length | 15m |
| Zinc Anodes | Fitted As Standard Ex Works |
| Motor Specification Data | |
|---|---|
| Rated Power | 90kW |
| Full Load Out Power | 89.8kW |
| Full Load Input Power | 95.6kW |
| Rotational Speed | 2958RPM |
| Power Factor | 0.923 |
| Motor Efficiency | 93.90% |
| Pump Efficiency | 60.20% |
| Overall Efficiency | 56.60% |
| Voltage | Full Load Current (A) | Resist Ω |
|---|---|---|
| 380V | 184.66 | 0.0461 |
| 400V | 176.43 | 0.0572 |
| 415V | 169.37 | 0.0623 |
| 440V | 159.96 | 0.0678 |
| 500V | 139.97 | 0.0796 |
| 525V | 132.91 | 0.0935 |
| 550V | 127.03 | 0.104 |
| 1000V | 70.87 | 0.1087 |
| *75°C @ 2KVDC/1min | *75°C @ 2KVDC/1min | *75°C @ 2KVDC/1min |
| Material Specifications Data | |
|---|---|
| Outer casing Stator Housing, Bearing Housing, Oil Housing & Diffusers Suction Covers | EN1561 GJL-200 Grey Cast Iron |
| Oil Housing, Diffusers & Suction Covers | Co-Polymer Polyurethane Wear Protection |
| Impellers | Stainless Steel |
| Mechanical Seals | 316 Stainless Steel / Viton + Tungsten / Silicon Carbide |
| Rotor Shaft | Duplex Stainless Steel |
| O-Rings | NBR + Hi-Temp HNBR + Viton |
| Strainer | 316 Stainless Steel |