Brisbane Airport QLD
McConnell Dowell was awarded the contract for the Dryandra Road Works, a significant structural element of the New Parallel Runway by Brisbane Airport Corporation (BAC). The Dryandra Road Project is a reinforced concrete 4-lane underpass structure, supported on approximately 700 precast concrete piles including 1.5km of roadway, full underpass fit-out with portions of taxiway and airfield road mounted atop the underpass structure.
We were able to complete the entire dewatering project with zero environmental compliance issues. Given the high level of scrutiny around water quality and the high number of auditing and compliance checks this was a major achievement.The process ensured the installation of the dewatering and water treatment facility was completed on time and within the allowed contract milestone dates set and agreed to prior to works commencing on site.
NPE’s wellpoint design meant that a single line wellpoint system could be used on site to effectively dewater a large multilayered ground strata excavation without placing any hydrostatic load on the sheet pile shoring system. Historically in these difficult and complex types of ground conditions this could have only been achieved using multiple staged or stepped down system. In this case this would have proven unacceptable given the increased footprint required, additional time needed to install and the increase in construction costs.
Wellpoint Dewatering Solution Delivered for Modcon Civil- SA
Our South Australian team was recently engaged by Modcon Civil to design and deliver a tailored dewatering solution in Robe,…
Eastern Treatment Plant Bypass – Melbourne, VIC
National Pump & Energy deliver bypass works for the incoming side of one of Melbourne’s busiest treatment plants. Eastern Treatment…
Bore Pump Installations & Commissioning – Kalgoorlie WA
The Kalgoorlie branch has recently completed a large run of bore pump installations and commissioning works across several sites. Over…
DN630 Pipeline Welding & Installation Project – Queensland
National Pump & Energy (NPE) was engaged to deliver specialised support for a DN630 HDPE pipeline installation as part of…
Poly Butt Welding for Resource Recovery Park
National Pump & Energy (NPE) was engaged to supply experienced poly welders and specialist poly welding equipment to support onsite…
NSW Central Coast Sewer Bypass Upgrade
National Pump & Energy was engaged to design, supply, install, and maintain a temporary sewer bypass pumping system to support…
Jovan Qualifies as Mechanical Fitter in Newcastle NSW | Apprenticeship Success
We are proud to announce that Jovan has officially qualified as a Mechanical Fitter after successfully completing his apprenticeship at…







