Temporary Underground Pump Station – Goldfields WA

A great client of ours installed an underground (UG) pump station, and expected flow rates to range from 100lps – 250lps.

This water was directed to a newly constructed holding dam where our pump was located.
We were then tasked to install multiple pipelines from the UG pump station to the holding dam and from the holding dam to the process water dam.
A high-flow NPE diesel pump was installed and commissioned by one of our NPE pump technicians.
NPE then sets up a high/low water level system using a level transducer within this holding dam to allow this water to transfer to the process water dam at a consistent rate.
This provided precious water to the mill to assist with processing on site.

This project was installed and commissioned efficiently within the client’s timeframe and budget.

Temporary Underground Pump Station – Goldfields WA

Requirements, Equipment and Images

Get in touch to discuss your requirements...

Call Us

NPE has not only one of the largest ranges of specialised equipment, but also the most qualified professionals in pumping and power generation in Australia.

Visit A Location

The NPE branch network is strategically positioned to service all parts of Australia. These hire branches are supported by a team of NPE representatives and field service crews.

© National Pump & Energy 2024

Website created by RJ New Designs