National Pump & Energy (NPE) has not only one of the largest ranges of specialised equipment, but also the most qualified professionals in pumping and power generation in Australia. Basically, when it comes to pumping, power generation and compressed air equipment, NPE are your total solutions partner. We offer tailored solutions and service. Our personal and detail oriented approach, means you can be assured all project requirements will be met. Below are some examples of our extensive experience across the construction, mining, oil & gas, municipal, agricultural and industrial industries.
NPE were engaged to perform a critical bypass required in order for our client to complete the final stage of a major project building additional capacity and redundancy into the local water authorities wastewater network.
Read MoreNPE were contacted by Narrabri Council to assist with the recent flooding event in the region. A trailer-mounted 6” pump was required to assist in flood mitigation works.
Read MoreNPE provides NSW SES with a quick turnaround pump hire service to help prevent flood damage in regional NSW.
Read MoreOur client Tonkin Gap Alliance is constructing the Northern Dive as part of its METRONET Morley-Ellenbrook Line rail enabling works.
Read MoreA local water authority recently asked NPE to provide a bypass for a pump station, the pump station needed to be taken offline to complete works.
Read MoreDue to aging infrastructure, the client was engaged to commence the re-lining of 39 Wastewater Pumping Chambers throughout South Australia.
Read MoreDue to the recent Murray River flooding, NPE were engaged by the client to provide a proposal for contingency Bypass Pumping for the MBO1 Pumping Station, which draws water directly from the Murray River and, via processing and several booster pump stations, eventually feeds water to the southern suburbs of Adelaide.
Read MoreGeorgiou contacted NPE to install a Dewatering system into a new subdivision in Ellenbrook, WA.
Read MoreNPE was asked to provide a screening solution that would allow the local council to take their entire inlet works offline for an extended period to facilitate the strip out, re-coating and refurbishment of their inlet works at the Byron Bay sewage treatment plant.
Read MoreDM Civil engaged with NPE to assist with a Wellpoint Dewatering System for a new DN1200 emergency overflow storage tank for the North Thomson Sewerage Pump Station #06 on Rottnest Island in WA.
Read MoreNPE, providing pumping solutions for the removal of marine silt and growth.
Read MoreNPE were engaged to develop and install a culvert plug solution for Melbourne Water’s Shakespeare Grove Main Drain Renewal project.
Read MoreThe client requested improved oxygen levels in the ponds at an Eastern Treatment Plant in Melbourne.
Read MoreOne of our valued customers asked us to provide a dewatering system to lower groundwater levels in preparation for constructing a basement carpark for their apartment building.
Read MoreA great client of ours installed an underground (UG) pump station, and expected flow rates to range from 100lps – 250lps.
Read MoreNPE Emptied and Cleaned Four Thickener Tanks Within a 12hr Shift.
Read MoreNPE were engaged in cleaning out & inspecting a man-hole.
Read MoreNPE was engaged in taking on a large flow Wellpoint Dewatering project south of Perth for deep sewer works.
Read MoreNPE was engaged to help our long-term offshore client with the flushing of their subsea infrastructure.
Read MoreNational Pump and Energy, keeping lights on in the Pilbara.
Read MoreJust another average day for the Newcastle Team.
Read MoreNPE has worked with a long-standing client in the Bowen Basin since 2015, supplying them with pumps as part of a project to aid in reducing water volumes on-site via the use of high-pressure sprays.
Read MoreNPE’s scope is the necessary work to complete the equipment relocations and the welding, pre-spooling, assembly, and installation of field pipelines for the project.
Read MoreNPE was chosen to undertake the dewatering for the storage tank installation at the Virginia Stormwater Pump Station.
Read MoreNPE was engaged for Mine Pit Dewatering in Kalgoorlie for a long-term customer expanding their mine.
Read MoreNPE were engaged in managing and constructing a sewer bypass for new sewer connections works to be carried out in a 10-day operation.
Read MoreNPE was originally awarded the EPCM contract for the Ravenswood Gold Mine Expansion Project in Ravenswood, North Queensland, to supply and operate a 6MW diesel power station.
Read MoreNPE were engaged to take on a Large flow well point dewatering project South of Perth for deep sewer works.
Read MoreNPE were chosen to undertake the critical dewatering and water treatment scope for the Northern Dive Structure on the Tonkin Gap Alliance project.
Read MoreNPE were engaged by PACT Construction for the Dewatering, Water Treatment & Environmental scope for the development of Riviere Luxury Residence in Applecross.
Read MoreNPE successfully empty and clean the digester, as well as testing and monitoring
Read MoreWater bypass solution to ensure water supply for Central Qld town.
Read MoreNational Pump & Energy use three 80-180 high flow pumps to dewater a large mine pit for a Northern Goldfields client in Western Australia.
Read MoreNational Pump and Energy supplied this complete bore pump package in Kalgoorlie.
Read MoreNational Pump & Energy delivered a complete dewatering solution for water management for this Mid-West mining client.
Read MoreNPE designed and supplied an on-water geotechnical drilling program for a minesite tailings pit located at a remote QLD mine site.
Read More© National Pump & Energy 2023