Chat with us, powered by LiveChat

SPP - QC200

The QC200-200mm pump is a fully enclosed diesel driven pump unit with high efficiency, designed to pump most liquids including sewage and semi solids.

SPP - QC200

The enclosure provides sound reduction and security for use in noise sensitive areas. Typical uses include removal of ground and rain water from excavations, trenches, footings, manholes and ponds. May also be used for stream and pipe diversions and flood water control, well point dewatering, pipe relining and sludge pumping. Design features include the following.

  • Bunded unit on optional two-wheel road trailer or skid.
  • 12 volt battery starting by key switch.
  • Pump will pass solids up to 75mm diameter and 90mm long.
  • Reliable double mechanical seals which allow dry running.
  • Pump can be left running when liquid is exhausted and will prime automatically when liquid is present.
  • Rugged construction requires minimal operator maintenance.
  • 65 cfm vacuum pump with coalescer and to filter exhaust air before emission into the atmosphere.
  • Features efficient ‘Smartprime’ technology for energy saving and reliability
Maximum Head (metres)36
Max Flow l/sec145
Maximum Suction8m
Solid Handling75
Size200x200
Priming SystemVacuum
Fuel Consumption-
Fuel Capacity24 hrs
OptionsTrailer

Pump curves of QC200

QC200

While this pump / equipment matches your duty criteria, other factors may determine the suitability and therefore NPE advise that you contact us to discuss your requirement.

Get in touch to discuss your requirements...

Call Us

NPE has not only one of the largest ranges of specialised equipment, but also the most qualified professionals in pumping and power generation in Australia.

Visit A Location

The NPE branch network is strategically positioned to service all parts of Australia. These hire branches are supported by a team of NPE representatives and field service crews.

© National Pump & Energy 2020

Website created by RJ New Designs